Net Bios Hacking

  

THIS NETBIOS HACKING GUIDE WILL TELL YOU ABOUT HACKING REMOTE COMPUTER AND
 GAINING ACCESS TO IT’S HARD-DISK OR PRINTER.NETBIOS HACK IS THE EASIEST WAY TO
 BREAK INTO A REMOTE COMPUTER.
STEP-BY-STEP NETBIOS HACKING PROCEDURE.


1.Open command prompt

2. In the command prompt use the “net view” command
( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP-TOOLS” SOFTWARE 
BY ENTERING RANGE OF IP ADDRESSS.BY THIS METHOD YOU CAN SCAN 
NUMBER OF COMPUTERS AT A TIME).

Example: C:>net view \59.43.45.212
The above is an example for operation using command prompt.”net view” 
is one of the netbios command to view the shared resources of the remote 
computer.Here “59.43.45.212? is an IP address of remote computer that is to 
be hacked through Netbios.You have to substitute a vlaid IP address in it’s 
place.If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown.If not 
an error message is displayed. So repeat the procedure 2 with a different IP 
address.

3. After succeeding, use the “net use” command in the command prompt.The 
“net use” is another netbios command which makes it possible to hack remote 
drives or printers.

Example-1:
C:>net use D: \59.43.45.212F
Example-2:
C:>net use G: \59.43.45.212SharedDocs
Example-3:
C:>net use I: \59.43.45.212Myprint

NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are 
to be created on your computer to access remote computer’s hard-disk.

NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES 
INCLUDING HARD-DISK DRIVES,FLOPPY DRIVES AND ROM-DRIVES ON YOUR 
COMPUTER.THAT IS IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE
AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND 
PROMPT

F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that 
you want to hack. “Myprint” is the name of remote computer’s printer. These 
are displayed after giving “net use” command. 59.43.45.212 is the IP address 
of remote computer that you want to hack.

4. After succeeding your computer will give a message that “The command 
completed successfully“. Once you get the above message you are only one 
step away from hacking the computer.[ad code=1 align=center]

Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the
specified name. You can open it and access remote computer’s Hard-Drive. You 
can copy files,music,folders etc. from victim’s hard-drive.You can delete/modify 
data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s 
system.You can access files folders quickly through “Command Prompt”.

NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not 
Succeed In Gaining Access To Remote Computer Through Net bios.That is Net 
bios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed). 
So Repeat The Procedure 2,3 With Different IP Address.